Adaptive Living Store - Wheelchair Access / All Products

Bluetooth Controller Kit Power Access Auto Door Opener

Mon, 2 Feb 2026 11:19:34 GMT

Bluetooth Controller Kit Power Access Auto Door Opener
Buy Now: $198.80

Installed when ordered with Power Access auto door opener.
Convenience: one less item to carry.
Functionality: one app can be used across multiple devices so additional persons in the home can activate the door as well
One app can also be used to activate multiple doors, however you will need the receivers in each opener.
Requires Separate Power Source for Use

Note: when ordering this app option, we recommend getting at least one additional controller, in case the phone dies or Bluetooth connection fails.

Visit Wheelchair Access to see additional products in this category.

Lever Door Handle Pocket

Fri, 17 Oct 2025 13:24:08 GMT

Lever Door Handle Pocket
Buy Now: $49.87

Protect your walls from door knob intrusion! Designed to work with swing clear hinges, door knob pockets add clearance when space is at a premium. For interior doors, fits standard lever doorknobs.

Features:

6" x 1-1/2" opening
White
Paintable
Made in USA

Visit Wheelchair Access to see additional products in this category.

Rubber Threshold EZEdge Ramp

Mon, 3 Jun 2024 11:54:10 GMT

Rubber Threshold EZEdge Ramp
Buy Now: $87.35

SafePath EZEdge Rubber Threshold Ramps have been used for many applications including:door thresholds, sliding glass doors, entry ways, roll-in showers.

EZEdge can be installed easily on any surface with tested and proven adhesives including concrete, asphalt, wood, tile and marble.

Choose the model closest to the height (threshold rise) of the transition, and the necessary width of the access. If you want Production to machine-custom cut, please enter: Custom Cut Final measure (full ramp length) or Custom Cut SURFACE measure (doorway opening measure)

The Instant Level Strip is a 1/4" shim for side-to-side unlevel doorways.

Features and Benefits:

No Load Weight Limitations
Molded Miter Ends
Field Fitted with Simple Cutting Tools
Installs Without Fasteners
Foot Traffic is Quiet and Solid
All Ramps are Slip Resistant
"Green" 100% Recycled Rubber
Excellent Thermal Insulator
Prduct weight: 7 lbs - 99 lbs
10 year guarantee
Made in the USA.

Please Note: All Ramps larger than 50" Width ship in 2 pieces, all 50"Wand under ship in one piece. The Manufacturer recommends Sikaflex-1a Adhesive for Installation of Rubber Threshold Ramps and Rubber Entry Level Landings. Please refer to Estimated Adhesive Chart to determine number of tubes of adhesive needed for project.

EZEdge is an environmentally sustainable product as it is produced from 100% recycled tires. EZ Edge is designed and tested for maximum slip resistance exceeding Static of Coefficient Friction (SCOF) requirements set by OSHA and recommended by ADAAG and federal law. EZ Edge eliminates the worry of bending or breaking the ramp due to heavy loads since this durable product possesses no weight load limitations.

Visit Wheelchair Access to see additional products in this category.

Vestibule Push Plate Wall Switch, Wired

Fri, 21 Apr 2023 09:45:56 GMT

Vestibule Push Plate Wall Switch, Wired
Buy Now: $395.00

Wireless Vestibule Door Sequencer

Two directional traffic

Visit Wheelchair Access to see additional products in this category.

Aluminum Modular XP Ramp to Turn Platform to Ramp to Turn Platform Kit 8

Tue, 11 Jun 2019 11:18:13 GMT

Aluminum Modular XP Ramp to Turn Platform to Ramp to Turn Platform Kit 8
Buy Now: $4,154.96

The PVI Modular XP Ramp System with Handrail KIT 8 has a clean uncluttered appearance that will fit in most surroundings. All aluminum design has lifetime durability in all kinds of climates. The PVI Modular Ramp System is designed to be freestanding and independent of the existing structure. In most cases this simplifies compliance with local codes and may eliminate the requirement for a permit. The components of the PVI Modular Ramp System are designed to be quickly and easily assembled with simple/common hand tools and set into place without the need for heavy construction equipment. A van, pickup truck, or small trailer is all that is needed to transport the ramp components to the job site.

Please email photos/measurements and SHIP TO address to: Service@AdaptiveLivingStore.com and we will provide quote.

PVI Aluminum Modular XP Ramp Kit 8 includes:

Two Modular Ramps with Handrails (choose 4', 6', 8' or 10' length)
Two Turn Platforms
Installation brackets & hardware.

Please reference the Incline Chart to define Rise In Inches for planning of safe ramp slope.

The Adaptive Living Store recommends following ADA Guidelines when installing ramp solutions.

Features:

Easy to assemble, move, or reconfigure
Ramp sections are welded in lengths of 3', 4' & 5' and combined to create longer ramp lengths
Durable and weather resistant
All aluminum construction
Little or no maintenance
45° and 60° platforms available for those hard to reach landing areas
ADA handrail extensions, stairs, and gates available
Standard 36" and custom 42", & 48" Wide ramping available
Standard 4X4, 4X5, 5X5, 5X6, 5X8, 5X10, & 6X6 platforms available
Limited Lifetime Warranty
Made in the USA

Specifications:

Width: 36" Usable
Length: Variable - 4’ minimum
Load Capacity: 100 lbs. per square foot
Slope: Adjustable – 1:12 Recommended
Floor: Slip resistant grooved aluminum
Ramp Edge Protection: 4” Curb - Meets ADA Standards
Handrails: Double 1-1/2” bar – Standard Height 34"–38"

LAYOUT CONSIDERATIONS:

SLOPES: The ADA recommends a slope of 1on12 when possible. However, when space is limited or other considerations require a steeper ramp, the PVI Modular Ramp System will accommodate slopes up to 2on12. When selecting the slope of the ramp the capabilities and safety of the users and their equipment must be considered.

HANDRAIL: ADA requires handrail on any system with a rise of 6” or more. All PVI Modular Ramp Systems require handrail. Ramps and landings will not be sold without handrail for safety reasons as well as the overall design of the ramp system.

RAMP CONFIGURATIONS: The usable width of the ramp is 36” with the overall width of the ramp being 42”. The length of the individual ramp segments are as follows: 2', 3’, 4’, & 5’. The segments are used to make lengths from 4’ and longer in 1’ increments.

RAMP AND LANDING ASSEMBLY: Complete detailed assembly instructions are included with each PVI Modular Ramp System. NOTE: DURING ASSEMBLY DO NOT TIGHTEN HARDWARE ALL THE WAY UNTIL ASSEMBLY IS COMPLETE.

FOOTING AND ANCHORING: The PVI Modular Ramp System is designed to be a freestanding, independent structure that does not have to be permanently attached to the building it serves. Each supporting leg is independently adjustable to allow for varying ground conditions. Adjustments due to settling or heaving can be made with a ratchet. Landings must have a minimum of one leg anchored on each of the two opposite sides. Each freestanding ramp must be anchored at the upper and lower end. Anchoring may consist of lag screws or bolts into existing concrete, precast pads, patio pavers or poured in place.

See PVI Modular Ramp System Quick Start Instructions here.

Visit Wheelchair Access to see additional products in this category.

Aluminum Modular XP Ramp to Switchback Platform to Ramp to Turn Platform Kit 7

Tue, 11 Jun 2019 11:17:22 GMT

Aluminum Modular XP Ramp to Switchback Platform to Ramp to Turn Platform Kit 7
Buy Now: $5,409.40

The PVI Modular XP Ramp System with Handrail KIT 7 has a clean uncluttered appearance that will fit in most surroundings. All aluminum design has lifetime durability in all kinds of climates. The PVI Modular Ramp System is designed to be freestanding and independent of the existing structure. In most cases this simplifies compliance with local codes and may eliminate the requirement for a permit. The components of the PVI Modular Ramp System are designed to be quickly and easily assembled with simple/common hand tools and set into place without the need for heavy construction equipment. A van, pickup truck, or small trailer is all that is needed to transport the ramp components to the job site.

Please email photos/measurements and SHIP TO address to: Service@AdaptiveLivingStore.com and we will provide quote.

PVI Aluminum Modular XP Ramp Kit 7 includes:

Two Modular Ramps with Handrails (choose 4', 6', 8' or 10' length)
One Switchback Platform
One Turn Platform
Installation brackets & hardware.

Easy to assemble, move, or reconfigure
Ramp sections are welded in lengths of 3', 4' & 5' and combined to create longer ramp lengths
Durable and weather resistant
All aluminum construction
Little or no maintenance
45° and 60° platforms available for those hard to reach landing areas
ADA handrail extensions, stairs, and gates available
Standard 36" and custom 42", & 48" Wide ramping available
Standard 4X4, 4X5, 5X5, 5X6, 5X8, 5X10, & 6X6 platforms available
Limited Lifetime Warranty
Made in the USA

Specifications:

Width: 36" Usable
Length: Variable - 4’ minimum
Load Capacity: 100 lbs. per square foot
Slope: Adjustable – 1:12 Recommended
Floor: Slip resistant grooved aluminum
Ramp Edge Protection: 4” Curb - Meets ADA Standards
Handrails: Double 1-1/2” bar – Standard Height 34"–38"

Visit Wheelchair Access to see additional products in this category.

Aluminum Modular XP Ramp to Turn Platform Kit 6

Tue, 11 Jun 2019 11:15:57 GMT

Aluminum Modular XP Ramp to Turn Platform Kit 6
Buy Now: $1,962.78

The PVI Modular XP Ramp System with Handrail KIT 6 has a clean uncluttered appearance that will fit in most surroundings. All aluminum design has lifetime durability in all kinds of climates. The PVI Modular Ramp System is designed to be freestanding and independent of the existing structure. In most cases this simplifies compliance with local codes and may eliminate the requirement for a permit. The components of the PVI Modular Ramp System are designed to be quickly and easily assembled with simple/common hand tools and set into place without the need for heavy construction equipment. A van, pickup truck, or small trailer is all that is needed to transport the ramp components to the job site.

Please email photos/measurements and SHIP TO address to: Service@AdaptiveLivingStore.com and we will provide quote.

PVI Aluminum Modular XP Ramp Kit 6 includes:

One Modular Ramp with Handrails (choose 4', 6', 8' or 10' length)
One Turn Platform
Installation brackets & hardware.

Easy to assemble, move, or reconfigure
Ramp sections are welded in lengths of 3', 4' & 5' and combined to create longer ramp lengths
Durable and weather resistant
All aluminum construction
Little or no maintenance
45° and 60° platforms available for those hard to reach landing areas
ADA handrail extensions, stairs, and gates available
Standard 36" and custom 42", & 48" Wide ramping available
Standard 4X4, 4X5, 5X5, 5X6, 5X8, 5X10, & 6X6 platforms available
Limited Lifetime Warranty
Made in the USA

Specifications:

Width: 36" Usable
Length: Variable - 4’ minimum
Load Capacity: 100 lbs. per square foot
Slope: Adjustable – 1:12 Recommended
Floor: Slip resistant grooved aluminum
Ramp Edge Protection: 4” Curb - Meets ADA Standards
Handrails: Double 1-1/2” bar – Standard Height 34"–38"

Visit Wheelchair Access to see additional products in this category.

Aluminum Modular XP Ramp to Switchback Platform to Ramp Kit 5

Tue, 11 Jun 2019 11:15:04 GMT

Aluminum Modular XP Ramp to Switchback Platform to Ramp Kit 5
Buy Now: $3,925.58

The PVI Modular XP Ramp System with Handrail KIT 5 has a clean uncluttered appearance that will fit in most surroundings. All aluminum design has lifetime durability in all kinds of climates. The PVI Modular Ramp System is designed to be freestanding and independent of the existing structure. In most cases this simplifies compliance with local codes and may eliminate the requirement for a permit. The components of the PVI Modular Ramp System are designed to be quickly and easily assembled with simple/common hand tools and set into place without the need for heavy construction equipment. A van, pickup truck, or small trailer is all that is needed to transport the ramp components to the job site.

Please email photos/measurements and SHIP TO address to: Service@AdaptiveLivingStore.com and we will provide quote.

PVI Aluminum Modular XP Ramp Kit 5 includes:

Two Modular Ramps with Handrails (choose 4', 6', 8' or 10' length)
One Switchback Platform
Installation brackets & hardware.

Easy to assemble, move, or reconfigure
Ramp sections are welded in lengths of 3', 4' & 5' and combined to create longer ramp lengths
Durable and weather resistant
All aluminum construction
Little or no maintenance
45° and 60° platforms available for those hard to reach landing areas
ADA handrail extensions, stairs, and gates available
Standard 36" and custom 42", & 48" Wide ramping available
Standard 4X4, 4X5, 5X5, 5X6, 5X8, 5X10, & 6X6 platforms available
Limited Lifetime Warranty
Made in the USA

Specifications:

Width: 36" Usable
Length: Variable - 4’ minimum
Load Capacity: 100 lbs. per square foot
Slope: Adjustable – 1:12 Recommended
Floor: Slip resistant grooved aluminum
Ramp Edge Protection: 4” Curb - Meets ADA Standards
Handrails: Double 1-1/2” bar – Standard Height 34"–38"

Visit Wheelchair Access to see additional products in this category.

Aluminum Modular XP Ramp to Turn Platform to Ramp Kit 4

Tue, 11 Jun 2019 11:14:14 GMT

Aluminum Modular XP Ramp to Turn Platform to Ramp Kit 4
Buy Now: $2,900.54

The PVI Modular XP Ramp System with Handrail KIT 4 has a clean uncluttered appearance that will fit in most surroundings. All aluminum design has lifetime durability in all kinds of climates. The PVI Modular Ramp System is designed to be freestanding and independent of the existing structure. In most cases this simplifies compliance with local codes and may eliminate the requirement for a permit. The components of the PVI Modular Ramp System are designed to be quickly and easily assembled with simple/common hand tools and set into place without the need for heavy construction equipment. A van, pickup truck, or small trailer is all that is needed to transport the ramp components to the job site.

Please email photos/measurements and SHIP TO address to: Service@AdaptiveLivingStore.com and we will provide quote.

PVI Aluminum Modular XP Ramp Kit 4 includes:

Two Modular Ramps with Handrails (choose 4', 6', 8' or 10' length)
One Turn Platform
Installation brackets & hardware.

Easy to assemble, move, or reconfigure
Ramp sections are welded in lengths of 3', 4' & 5' and combined to create longer ramp lengths
Durable and weather resistant
All aluminum construction
Little or no maintenance
45° and 60° platforms available for those hard to reach landing areas
ADA handrail extensions, stairs, and gates available
Standard 36" and custom 42", & 48" Wide ramping available
Standard 4X4, 4X5, 5X5, 5X6, 5X8, 5X10, & 6X6 platforms available
Limited Lifetime Warranty
Made in the USA

Specifications:

Width: 36" Usable
Length: Variable - 4’ minimum
Load Capacity: 100 lbs. per square foot
Slope: Adjustable – 1:12 Recommended
Floor: Slip resistant grooved aluminum
Ramp Edge Protection: 4” Curb - Meets ADA Standards
Handrails: Double 1-1/2” bar – Standard Height 34"–38"

Visit Wheelchair Access to see additional products in this category.

Aluminum Modular XP Ramp to Turn Platform to Ramp to Platform Kit 3

Tue, 11 Jun 2019 11:13:33 GMT

Aluminum Modular XP Ramp to Turn Platform to Ramp to Platform Kit 3
Buy Now: $4,154.96

The PVI Modular XP Ramp System with Handrail KIT 3 has a clean uncluttered appearance that will fit in most surroundings. All aluminum design has lifetime durability in all kinds of climates. The PVI Modular Ramp System is designed to be freestanding and independent of the existing structure. In most cases this simplifies compliance with local codes and may eliminate the requirement for a permit. The components of the PVI Modular Ramp System are designed to be quickly and easily assembled with simple/common hand tools and set into place without the need for heavy construction equipment. A van, pickup truck, or small trailer is all that is needed to transport the ramp components to the job site.

Please email photos/measurements and SHIP TO address to: Service@AdaptiveLivingStore.com and we will provide quote.

PVI Aluminum Modular XP Ramp Kit 3 includes:

Two Modular Ramps with Handrails (choose 4', 6', 8' or 10' length)
One Turn Platform
One Through Platform
Installation brackets & hardware.

Easy to assemble, move, or reconfigure
Ramp sections are welded in lengths of 3', 4' & 5' and combined to create longer ramp lengths
Durable and weather resistant
All aluminum construction
Little or no maintenance
45° and 60° platforms available for those hard to reach landing areas
ADA handrail extensions, stairs, and gates available
Standard 36" and custom 42", & 48" Wide ramping available
Standard 4X4, 4X5, 5X5, 5X6, 5X8, 5X10, & 6X6 platforms available
Limited Lifetime Warranty
Made in the USA

Specifications:

Width: 36" Usable
Length: Variable - 4’ minimum
Load Capacity: 100 lbs. per square foot
Slope: Adjustable – 1:12 Recommended
Floor: Slip resistant grooved aluminum
Ramp Edge Protection: 4” Curb - Meets ADA Standards
Handrails: Double 1-1/2” bar – Standard Height 34"–38"

Visit Wheelchair Access to see additional products in this category.