POWER ACCESS 2300 automatic door openers are designed for opening and closing side hinged residential doors - both exterior and interior. Unit is designed to assist disabled individuals toward independence.
POWER ACCESS 2300 door operators are simple to install. No modification of the door or jambs is required. Plugs directly into a standard wall outlet. Designed for versatility, this opener fits most interior and exterior doors. Left and right hand units are available, in jamb or door mount.
POWER ACCESS door openers are activated by a remote wired or wireless signal.
Safety:
POWER ACCESS automatic door operators have important, built-in, mechanical and electrical safety features. Permits manual door operation, even though the arm to close the door is attached to either the frame or the door. The high gear ratio facilitates manual opening and closing of the door. On a powered opening or closing, if the door meets an obstruction the slip clutch reduces the pressure and the motor will time out and stop. Also features an adjustable, timed, hold-open feature of 0-30 seconds, as well as a signal to open and a signal to close.
Door Mount:
The POWER ACCESS Model 2300 can be retrofitted to most residential side hinged doors for power opening and power closing - or the door can be opened and closed manually. The model 2300 unit can be door mounted on the pull side of the door (right or left) with the arm attached to the top of the doorframe. This door mount application will meet most of the front door situations where the door opens in and the door opener is protected from the outside weather. The minimum back clearance requirement from the face of the back of the door is 3 inches. The arm assembly consists of a friction clutch arm that is attached to the motor shaft and the other end to an adjustable threaded regular forearm that in turn connects to the doorframe by means of an adjustable shoe.
Jamb Mount (recommended for interior doors only):
The POWER ACCESS Model 2300 can also be jamb mounted to the top of the wall above the door frame on the push side of the opening (not on the pull side) with the motor shaft facing down and the shoe of the adjustable forearm extension attached to the door by means of the shoe. The arm for the jamb mount application requires an extended forearm, which has a longer threaded portion with lock nut to meet deeper reveals (up to 7"). If a unit is ordered for jamb mount it will come with the longer forearm extension.
Determining the Door "Hand"
The hand is always determined by standing on the "push" side of the door and observing on which side of the door the hinges are located - a door with hinges on the right requires the right hand configuration - door with hinges on the left requires the left hand configuration. Door mount models are also handed from the push side of the door even though the unit is installed on the pull side.
Applications:
The basic model 2300 will cover the following four applications:
2300DR right hand door mount on pull side of the door
2300DL left hand door mount on pull side of the door
2300JR right hand jamb mount (above the door) on push side *
2300JL left hand jamb mount (above the door) on push side *
*The jamb mount model cannot be mounted to the side jamb or on the pull side of the door. Also it is not recommended that the 2300 jamb mount unit be used on an out swinging exterior door because the external forces might cause the door to drift closed when not under power.
Features:
- The door can always be opened manually from either side (although a key may be required)
- If the door meets an obstruction during the opening cycle, the friction clutch will slip, timeout and close
- Thermally protected drive motor
- Adjustable door hold-open time from 0 to 30 seconds, or hold-open that requires a signal to close
- Auto close feature
- Many built in logic features (for example, door can be opened manually and close automatically)
- Easy installation
- Built-in safety
- Rugged construction
- Solid state circuitry
- Low-cost and virtually maintenance free.
Specifications:
- Operation: Electro-mechanical. Opens and closes the door. Seven second cycle time. Adjustable Timed Hold Open feature for 0 to 30 seconds, or a hold open that requires a signal to close.
- Physical Application: For residential side hinged doors. Door mount on pull side (needs 3 1/2” back clearance) - 3” above top of door needed for arm hub. Jamb mount on top of push side. Avoid out-swinging exterior door.
- Power: Requires 115Vac 60Hz standard outlet (9 foot power cord supplied).
- Material/Finish: Painted welded steel frame, Gray ABS plastic housing.
- Motor: 115Vac 60Hz gear motor, thermally protected.
- Activation: Touch plate, push button, push plate, radio transmitter, mats, or any momentary dry contact signal.
- Installation: Interior installation to protect from weather and temperatures.
- Dimensions: 12-3/4"W x 6"H x 3-1/2"D
- Weight: 10 pounds
- Complete instructions are packed with every unit.
- One year limited warranty on materials and workmanship.
Please call for current lead times.
